Security

Safety symbols and signs on products.

Candle with LED color changing diode. Full description:

  • At the bottom of the candle there is a battery-powered diode, activated by lighting the wick
  • The diode will change the color of the candle for as long as its burning time
  • Candle material: paraffin
  • Safe burning up to 4 cm from the bottom!
  • In addition, the candle with the diode should be used in accordance with the general principles of safe candle burning - pictograms placed on the label located on the candle
  •         

Warning !

General safety symbol, please note further information regarding the correct and safe use of our products.

Never leave a burning candle unattended !

Always extinguish a candle if you leave a room where a candle is burning.

Burn candles out of the reach of children and pets !

Do not allow children and animals within reach of the candle.

Never place a burning candle near curtains or other flammable objects. It is open fire, therefore caution is always necessary !

It is important to remember that a candle is an open flame and therefore a potential fire hazard if not watched carefully.

Place candles at a distance of 10 cm from each other !

When candles are burned too close together, temperatures increase and the candles may drip and the candle container may crack.

Candles should be burned in a vertical position !

Make sure the candle is placed stably and will not tip over, which is a fire hazard. A candle placed crookedly will drip and smoke.

Do not move a burning candle !
Moving a burn  candle can cause the melted, hot paraffin to spill. There is a risk of burns. The fire hazard also increases.

Use a candle holder !

This will protect the surfaces on which the candle burns from damage. Make sure the holder you use is made of a non-flammable, heat-resistant material.

Do not place candles in a draught !

Burning candles in a draft shortens the burn time, causes the candle to burn unevenly, smoke, drip, and cause the scent to spread unevenly in the room. It is important  to burn candles away from air conditioning, fans, or open windows.

Do not extinguish a candle with water !

Pouring liquid into a candle can cause hot paraffin to splatter and the glass container of the candle to crack. There is a risk of burns. The fire hazard also increases.

Use, preferably, a snuffer to put out the flame !

This is the safest way to prevent hot paraffin from splattering. Do not blow out the flame.

The wick should not be longer than 1 cm. If the wick is longer it may smoke and flicker. If necessary, trim the wick before lighting the candle !

The candle will burn with an even, uniform flame. This will prevent the wick from “mushrooming” or curling up, which will cause smoking. Make sure that no end of the cut wick has fallen into the paraffin. Any impurities will cause combustion disruptions, e.g. flame flickering, which will cause smoking and dirtying of the candle container.

Do not place a burnt match or other materials in the candle wax !

Any impurities also cause combustion disturbances, e.g. flame flickering, which leads to smoking and contamination of the candle container.

Light only once!

Relighting may result in a shorter burning time due to the large amount of paraffin residue.

Avoid direct inhalation of smoke !

Keep out of reach of children !

Keep children away from the candle.

Product not for consumption !

Do not place candles near a heat source !

An additional heat source, such as a radiator or fireplace, causes the temperature to rise and, as a result, the glass container of the candle will deform, drip or crack.

Remove the foil  before lighting the candle !

Remove foil and other packaging (if they are) before lighting.

Remove the label before lighting the candle !

Before lighting, remove the label and other packaging elements (if any).

Make sure that the side of a candle does not get too high. Trim the edge if it gets higher than 1 cm !

Ensures even burning of the candle. Be careful not to damage the edge of the candle and cause the liquid wax to leak out.

Do not touch a burning candle !

There is a risk of burns.

Use a candle holder!

This will protect the surfaces on which the candle burns from damage. Make sure the holder you use is made of a non-flammable, heat-resistant material.

This candle is not suitable for indoor use. Only use this candle outdoors !

Ventilate the room after use !

Only use the T-light  with a base with adequate ventilation!

It will ensure adequate air flow and thus proper burning of the candle.
Always use a suitable holder as these candles will become fluid completely whilst burning !